On site machining of front and back deburring tools (this customer only needs reverse chamfering)

The customer needs reverse chamfering and deburring. Material of the workpiece: casting

Hole diameter: 8mm

Selected front and back deburring tools: SV-BW-7.5

Processing parameters of reverse deburring tool: n=800, F=100

Reverse attack distance: 3mm; The rest are fast forward and fast backward.

As the customer only needs to reverse chamfer and remove burrs, the machine tool will quickly feed without rotation, and the blade will directly shrink into the tool body. After passing through the hole, the blade will automatically pop out.

Only reverse a 3mm machining stroke, the rest are fast rewind programs.

Processing result: The customer is satisfied with the size and quality of the chamfer

If the customer finds the chamfer too large, we can reduce the chamfer size by increasing the feed or loosening the tail screws.

If the customer finds the chamfer too small, we can increase the chamfer size by reducing the feed or tightening the tail screws.

Our front and back deburring tools not only meet the requirements of reverse deburring, but also perform well in the forward direction, with one through hole and double-sided chamfering for deburring.

As the R&D and producer of positive and negative deburring tools, we can provide customers with various non-standard solutions. Let you no longer worry about the problem of burrs in the opposite direction of the hole.